Cleaning the washing machine: 7 tips for a musty smell and dirt

It is not for nothing that saving energy when washing clothes has been in vogue for a long time: after all, electricity consumption is reduced and with it our costs! And most new washing machines make the whole thing even easier for us with energy-saving programs – actually perfect, right? Almost. Washing at a low temperature is great for power consumption, but bad for the hygiene conditions in our washing machine in the long term. If you only wash it 30 or 40 degrees, dirt and grease will accumulate on the sealing ring and in the detergent drawer. This leads to the formation of bacteria and mold. The result: our washing machine stinks.

But don’t worry, you don’t have to say goodbye to the energy-saving programs – often it is enough to wash at higher temperatures in between. And if something has built up, just try one of the following tips to clean your washing machine.

Clean the washing machine: basic cleaning
As with all household appliances, regular washing is also required for the washing machine:
Wipe the outside with a damp cloth to prevent residues of the detergent from sticking to it. Remove dirt from the lint filter and the rubber seal with a cloth soaked in vinegar. This will prevent mold from forming there.
Clean all rinsing compartments in the detergent drawer carefully. Then rub dry.
Do you have very calcareous water? To clean the drum, use a lime cleaner. It is ideal for removing stubborn lime and soap residues.
In order not to give mold and bad smell a chance, always leave the washing machine door and the detergent drawer slightly open. This will allow the remaining water to evaporate.

Clean the washing machine: wash at high temperature
As a preventive measure and also to get rid of soiling that has already occurred, it is often enough if you occasionally do wash cycles above 60 degrees. This is useful, for example, when you wash your towels – they should always be washed at a minimum of 60 degrees to kill bacteria.

Clean the washing machine with vinegar
Use vinegar from time to time when cleaning the rubber seals, drum, and detergent drawer! However, make sure that you always dilute an essence according to the manufacturer’s instructions. Because not only the washing machine but also your respiratory tract could otherwise be damaged since vinegar is an acid. Therefore our dosage recommendation for the common vinegar: Mix 200 milliliters of vinegar with 400 milliliters of water.

Clean the washing machine with dishwasher tabs
This tip applies especially to the washing machine drum: Although the drum always appears very clean and shiny at first glance, it often hides bacteria and germs that can later lead to mold. Therefore, let an empty washing machine run at least 60 degrees regularly – after about 10 to 20 washes. The only thing you can put in is a dishwasher tab!

Clean the washing machine with baking soda
In addition to vinegar, baking soda is also a true all-rounder in the household and – besides baking – also serves wonderfully as a cleaning agent. Bacteria, germs, and fungi don’t stand a chance! This is how the baking soda works: pour 50 grams of baking soda into the detergent drawer and start a washing cycle at least 60 degrees.

Clean the washing machine with lemon juice
Use lemon juice to clean the rubber seal! The acid contained in it dissolves dirt and fat deposits. Simply dampen a cloth with lemon juice and some water and wipe the edge of the drum.

Clean the washing machine with baking soda
Cleaning baking powder and washing machine? Yes of course! All you need is a packet of it and some water. Mix the whole thing into a creamy paste and put it either in the detergent drawer or directly in the drum. Set the machine to at least 60 degrees – this will remove germs and lime!

Tell us how to clean your washing machine. There are definitely enough home remedies! Do you have any more tips for us?

Leave a Reply

Your email address will not be published. Required fields are marked *